specification control drawing te connectivity 300 constitutional drive menlo park, ca 94025 usa raychem title: soldersleeve* shield terminator, immersion resistant unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: so63-x-00 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 16-apr-11 doc issue: 7 drawn by: m. foronda cage code: 06090 replaces: d981343 dcr number: d981964 prod. rev.: see table scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision product revision product dimensions cable dimensi ons product name ident. code l ? 1.75 (l ? 0.07) ?a min ?b min c min ?d max ?e max ?f min ?g min so63-1-00 e so631r 16.5 (0.650) 1.90 (0.075) 2.65 (0.105) 8.25 (0.325) 1.90 (0.075) 2.65 (0.105) 0.90 (0.035) 0.50 (0.020) so63-2-00 e so632r 16.5 (0.650) 2.65 (0.105) 3.68 (0.145) 8.25 (0.325) 2.65 (0.105) 3.68 (0.145) 1.40 (0.055) 0.75 (0.030) so63-3-00 e so633r 16.5 (0.650) 4.30 (0.170) 5.08 (0.200) 8.25 (0.325) 4.30 (0.170) 5.08 (0.200) 2.15 (0.085) 1.25 (0.050) so63-4-00 e so634r 19.1 (0.750) 5.95 (0.235) 6.45 (0.255) 8.25 (0.325) 5.95 (0.235) 6.45 (0.255) 3.30 (0.130) 1.80 (0.070) so63-5-00 e so635r 19.1 (0.750) 7.00 (0.275) 7.60 (0.300) 8.25 (0.325) 7.00 (0.275) 7.60 (0.300) 4.30 (0.170) 2.50 (0.100) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. solder preform with flux and thermal indicator: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: fusible ring, melt point: 22 1 ? c. 3. meltable rings: environment resistant thermoplas tic. color: blue. application 1. these parts are designed to provide an environme nt resistant shield terminations on cables, rated f or 125 ? c minimum, meeting the dimensional criteria listed, having tin or silv er plated shields and insulation compatible with th e insert material. for compatible insulations, see mil-s-83519/1 or consult raych em. 2. when installed per raychem process standard rcps -100-70, assemblies will meet requirements of raych em specification rt-1404 and mil-s-83519. 3. temperature range: -55 ? c to +150 ? c. for best results, prepare the cable as shown: * a trademark of te connectivity.
|
